New Type 1-10T DZL Series Chain Grate Stoker wood pellets and biomass boiler for drying factory

Product details
The DZL type biomass boiler produced by the company is a horizontal three-return tubular boiler. The combustion process of the fuel can be briefly described as follows: the automatic feeding device can throw the biomass fuel into the furnace, and after the fuel is fully burned in the furnace, the high-temperature smoke enters the front smoke through two sets of airfoil flues arranged on both sides of the furnace. The box is then threaded into the rear smoke box through a threaded tube that is inserted into the drum. It is then drawn into the flue, dust collector and chimney by an induced draft fan and finally discharged to the atmosphere. The boiler is safe and stable in operation, easy to operate, and low in failure rate.

Product Features
1. By introducing the heat-receiving top of the bottom of the drum, the novel furnace structure successfully solves the problem that the bottom of the drum is directly exposed to high-temperature flame, and avoids the phenomenon of “bullet pack” at the bottom of the boiler.
2. The flue is designed on both sides of the boiler body to avoid cracks in the tube sheet due to temperature unevenness.
3.The single-return threaded pipe is used in the drum to enhance the heat transfer effect. At the same time, the threaded pipe has self-cleaning function, which avoids the accumulation of ash in the pipe.
4.The whole cast structure is used before and after the boiler to form a permanent arch. The rear arch is low and long, and the exit section is reversed. The front arch angle of 45° echoes the rear arch, forming a distinct inverted “α” flame, which is conducive to the combustion of biomass fuel, and has a wide variety of fuels.
5.The design of the sealing structure on the side of the grate is advanced and reasonable, which avoids the defects of uneven air distribution on both sides of the grate and the grate and the burning of the side sealing structure. The 4t/h and below boilers adopt side seal angled iron rib plate structure, and the 6t/h boiler adopts contact side seal structure.
6.There is an independent adjusting air chamber under the grate, and air is introduced on both sides. The new curved arm screw adjustment structure is adopted, so that the cross-section ratio of the ventilation and ventilation is 100%, the adjustment is flexible, and the air distribution is uniform. Push-pull gate ash cleaning device, the ram is made of heat-resistant cast iron material, which effectively prevents the deformation of the grate and the leakage of the grate.

The details photo of biomass steam fired boiler is list below.

Contact the relevant personnel and do the following preparations:
1. On duty staff: water supply to the water pipe.
2.Thermal duty personnel: put the instrument and operating device in working condition, and replace the ignition thermal couple.
3. Fuel duty personnel: The automatic loading device is ready.
4. Chemical duty staff: test the quality of the boiler water.
5. Electric duty personnel: The electrical equipment used ensures that the power supply is normal.
6. Prepare enough material for the furnace.
7. Check ignition combustion and fuel supply system for normal operation.
8. Various tools and analytical equipment.
9.Test the ability of the auxiliary system to assist the steam, compressed air, cooling water, water treatment equipment, etc. to work properly.
10. After the preparation work is completed, the water injection work can be carried out according to the regulations.

The more details table about the biomass steam boiler is below:

Yongxing Boiler Group Co., Ltd. is a group company specializing in research, development, manufacturing, sales and installation services for various boilers and various thermal energy machinery and equipment.

Yongxing Boiler occupies an area of 60,000m2, with fixed assets of 15 million dollars, and is used for more than 100 sets of large and medium-sized equipment for production. More than 60 sets of advanced equipment for product quality inspection, with 37 series. The boiler and pressure vessel contains 167 specifications and models.

With A-class boiler manufacturing license issued by the General Administration of Quality Supervision, Inspection and Quarantine

A1 and A2 pressure vessel manufacturing licenses

The first-class boiler installation and transformation license

The ISO9001 international quality system certification and so on.

Annual production capacity is over 2000 tons.

YONGXING boiler main product:

Coal fired steam boilers, oil/gas steam boiler,hot water boilers, Thermal oil heaters, hot air furnace, oil/gas burners,chain grate accessories, and other environmentally friendly boilers and pressure vessels .

All the equipment are strictly enforced by the state and Industry standard, reasonable product design, advanced production technology, technical content in the country's similar products in a leading position, with compact structure, low noise, high thermal efficiency, safe and reliable operation, high degree of automation, etc.

All environmental indicators are in line with the national class I regional environmental protection standards require excellent products recommended by the environmental protection department.

Our company holds A-class boiler manufacturing qualification, A1, A2 pressure vessel manufacturing qualification and mechanical and electrical equipment installation engineering professional contracting qualification, and passed the international ISO9001 2000 quality management system certification.

Our company strictly follows the ISO9001 international quality management system guarantee model, carries out quality management and quality inspection and control activities, and the product quality is stable. It was rated as “Contract-honoring and Promise-keeping Enterprise” by the Henan Provincial Administration of Industry and Commerce, “National Honest and Law-abiding Enterprise” by the Ministry of Agriculture, and was included in the member unit by the China Quality and Technical Supervision Association, and has obtained a number of patented technologies.

Company honor: